Illustrative imageEngineering family
PA / Nylon
Strong, tough and slippery. Great for wear parts.
Nylon (polyamide) is strong, tough and has low friction, which suits gears, hinges and parts that rub. It absorbs moisture from the air very quickly, which ruins print quality and changes the properties of the finished part.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 260–290 °C
- Bed temperature
- 80–110 °C
- Print speed
- Moderate speeds
- Finish
- Satin
- Drying
- Must be dried before printing and kept dry while printing.
- Enclosure & ventilation
- Enclosed printer recommended, with ventilation or filtration for fumes.
- Storage
- Airtight dry box with fresh desiccant. Absorbs moisture from the air quickly.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Gears and bushings
- Hinges and clips
- Wear-resistant parts
Not recommended for
- Parts that must hold exact dimensions in humid places
- Printing without drying
- Open printers