Illustrative imagePLA family
PLA Bicolor
Two colors in one strand. The color shifts as you turn the piece.
Bicolor (dual-color) filament is extruded with two colors side by side. Depending on the viewing angle, the printed piece shows one color, the other, or a blend. Most bicolor filaments are silk-type, with the same glossy finish and lower layer strength.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 210–240 °C
- Bed temperature
- 35–65 °C
- Print speed
- Slow to standard speeds
- Finish
- Glossy, two-tone
- Drying
- Usually prints well from a sealed spool. Dry it if the surface turns rough or stringy.
- Enclosure & ventilation
- Not required. Prints best with good airflow.
- Storage
- Sealed bag or box with desiccant, away from sunlight.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Sculptures and showpieces
- Vases
- Decorative gifts
Not recommended for
- Functional parts
- Pieces where an exact color is required
- Hot environments