Illustrative imagePLA family
PLA Silk
A shiny, metallic-looking finish for showpieces.
Silk PLA has additives that produce a glossy, almost metallic surface. It is made for pieces meant to be looked at. The shine comes at the cost of layer strength, so it is not the best pick for functional parts.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 210–240 °C
- Bed temperature
- 35–65 °C
- Print speed
- Slow to standard speeds
- Finish
- High-gloss, metallic sheen
- Drying
- Usually prints well from a sealed spool. Dry it if the surface turns rough or stringy.
- Enclosure & ventilation
- Not required. Prints best with good airflow.
- Storage
- Sealed bag or box with desiccant, away from sunlight.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Trophies and display pieces
- Vases and sculptures
- Decorative gifts
Not recommended for
- Functional or load-bearing parts
- Snap fits and thin clips
- Hot environments