Illustrative imagePLA family
PLA Matte
A soft, non-reflective surface that hides layer lines.
Matte PLA diffuses light, so the layers of a print are much less visible. It gives pieces a premium, ceramic-like look. It is usually a little less strong between layers than basic PLA.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 190–230 °C
- Bed temperature
- 35–65 °C
- Print speed
- Standard speeds
- Finish
- Matte, hides layer lines
- Drying
- Usually prints well from a sealed spool. Dry it if the surface turns rough or stringy.
- Enclosure & ventilation
- Not required. Prints best with good airflow.
- Storage
- Sealed bag or box with desiccant, away from sunlight.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Decor and display pieces
- Prototypes and concept models
- Toys, figures and gifts
- Indoor organizers
Not recommended for
- Hot cars and direct summer sun
- Parts under constant load or heat
- Long-term outdoor use