Illustrative imagePLA family
PLA Basic
The everyday material. Easy, clean and available in the most colors.
PLA is the most widely used 3D printing material. It prints at low temperatures with very little warping, which makes fine detail and sharp edges easy to achieve. It is the right starting point for decor, gifts and prototypes that stay indoors.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 190–230 °C
- Bed temperature
- 35–65 °C
- Print speed
- Standard speeds
- Finish
- Semi-gloss
- Drying
- Usually prints well from a sealed spool. Dry it if the surface turns rough or stringy.
- Enclosure & ventilation
- Not required. Prints best with good airflow.
- Storage
- Sealed bag or box with desiccant, away from sunlight.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Decor and display pieces
- Prototypes and concept models
- Toys, figures and gifts
- Indoor organizers
Not recommended for
- Hot cars and direct summer sun
- Parts under constant load or heat
- Long-term outdoor use