Illustrative imagePLA family
PLA+
PLA with added toughness, for parts that get handled.
PLA+ (also sold as tough PLA) is a modified PLA that is less brittle than the basic version. The exact formula changes from brand to brand, so the gain in toughness also varies. A good choice for pieces that are picked up, clipped or dropped.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 190–230 °C
- Bed temperature
- 35–65 °C
- Print speed
- Standard speeds
- Finish
- Semi-gloss
- Drying
- Usually prints well from a sealed spool. Dry it if the surface turns rough or stringy.
- Enclosure & ventilation
- Not required. Prints best with good airflow.
- Storage
- Sealed bag or box with desiccant, away from sunlight.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Parts that get handled often
- Snap fits and clips
- Stands and holders
- Gifts that need to survive a fall
Not recommended for
- Hot cars and direct summer sun
- Parts under constant load or heat
- Long-term outdoor use