Illustrative imageEngineering family
PVA / BVOH (support)
Water-soluble supports for shapes that cannot be printed otherwise.
PVA and BVOH are not used for the part itself. They are printed as support structures and then dissolved in water, leaving clean surfaces where normal supports would leave marks. They are very sensitive to moisture, and each one pairs with specific materials.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 190–230 °C
- Bed temperature
- 35–65 °C
- Print speed
- Slow speeds
- Finish
- Not a finish material
- Drying
- Must be dried before printing and kept dry while printing.
- Enclosure & ventilation
- Not required. Prints best with good airflow.
- Storage
- Airtight dry box with fresh desiccant. Absorbs moisture from the air quickly.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Complex overhangs and internal cavities
- Clean undersides on detailed models
- Moving parts printed in place
Not recommended for
- Use as the main material
- Storage outside a dry box
- Pairing with materials the manufacturer does not list