Illustrative imagePLA family
PLA Marble
A speckled, stone-like look straight off the printer.
Marble PLA contains fine dark particles that create a natural stone pattern. It hides layer lines well and suits busts, planters and architectural models. Because of the particles, some brands recommend a slightly larger nozzle.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 190–230 °C
- Bed temperature
- 35–65 °C
- Print speed
- Standard speeds
- Finish
- Matte, speckled stone look
- Drying
- Usually prints well from a sealed spool. Dry it if the surface turns rough or stringy.
- Enclosure & ventilation
- Not required. Prints best with good airflow.
- Storage
- Sealed bag or box with desiccant, away from sunlight.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Busts and statues
- Planters and vases
- Architectural models
Not recommended for
- Hot cars and direct summer sun
- Parts under constant load or heat
- Long-term outdoor use