Illustrative imageEngineering family
PC
Very strong and impact resistant, with high heat resistance.
Polycarbonate is one of the toughest printable plastics and keeps its strength at high temperatures. It is demanding: it needs high temperatures, a heated enclosed chamber and dry filament, and it warps easily.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 260–290 °C
- Bed temperature
- 90–120 °C
- Print speed
- Moderate speeds
- Finish
- Glossy, can be translucent
- Drying
- Must be dried before printing and kept dry while printing.
- Enclosure & ventilation
- Enclosed printer recommended, with ventilation or filtration for fumes.
- Storage
- Airtight dry box with fresh desiccant. Absorbs moisture from the air quickly.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Impact-resistant covers
- Parts near heat sources
- Strong functional prototypes
Not recommended for
- Open printers
- Large flat parts
- Printing without drying