Illustrative imageEngineering family
ABS
A classic engineering plastic: heat resistant and tough.
ABS handles heat and impact better than PLA and PETG, and it can be sanded and smoothed for a clean finish. It shrinks as it cools, which causes warping, and it releases fumes while printing. It weakens and yellows in sunlight.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 240–270 °C
- Bed temperature
- 80–110 °C
- Print speed
- Moderate speeds
- Finish
- Semi-matte, can be smoothed
- Drying
- Benefits from drying before printing, especially after being left open.
- Enclosure & ventilation
- Enclosed printer recommended, with ventilation or filtration for fumes.
- Storage
- Sealed bag or box with desiccant, away from sunlight.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Parts exposed to heat
- Enclosures and housings
- Mechanical parts
Not recommended for
- Long-term outdoor use
- Open printers in cold rooms
- Large flat parts without an enclosure