Illustrative imageTPU family
TPU for multi-material systems
Stiffer TPU grades that some brands make for automatic feeders.
Most flexible filaments cannot be pushed through an automatic material system. Some manufacturers sell firmer TPU grades designed for that. Compatibility depends on the exact filament and feeder model, so we only use it where the manufacturer confirms it.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 220–250 °C
- Bed temperature
- 30–50 °C
- Print speed
- Slow speeds
- Finish
- Satin
- Drying
- Must be dried before printing and kept dry while printing.
- Enclosure & ventilation
- Not required. Prints best with good airflow.
- Storage
- Airtight dry box with fresh desiccant. Absorbs moisture from the air quickly.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Multi-color pieces with flexible areas
- Rigid parts with soft details
Not recommended for
- Rigid structural parts
- Sharp, thin decorative detail
- Parts that need tight dimensional accuracy