Illustrative imageTPU family
TPU 95A
The standard flexible material. Firm rubber feel.
TPU 95A is the most common flexible filament. It feels like a firm rubber: it bends, compresses and returns to shape. It resists abrasion and impact very well. Printing is slower than rigid materials.
Properties
General comparison between materials, from 1 to 5. Not lab measurements.
Print settings
- Nozzle temperature
- 220–250 °C
- Bed temperature
- 30–50 °C
- Print speed
- Slow speeds
- Finish
- Satin, rubber-like
- Drying
- Must be dried before printing and kept dry while printing.
- Enclosure & ventilation
- Not required. Prints best with good airflow.
- Storage
- Airtight dry box with fresh desiccant. Absorbs moisture from the air quickly.
- Printer compatibility
- AMS compatibility
Temperatures are general ranges and change with brand and formula. The manufacturer’s data sheet always comes first.
Recommended for
- Grips, bumpers and feet
- Seals and gaskets
- Protective cases
- Parts that must bend and return
Not recommended for
- Rigid structural parts
- Sharp, thin decorative detail
- Parts that need tight dimensional accuracy